MAX5815 Datasheet | Maxim Integrated

EVALUATION KIT AVAILABLE MAX5813/MAX5814/MAX5815 Ultra-Small, Quad-Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and I2C Interface General Description The MAX5813/MAX5814/MAX5815 4-channel, low-power, 8-/10-/12-bit, voltage-output digital-to-analog converters (DACs) include output buffers and an internal reference that is selectable to be 2.048V, 2.500V, or 4.096V. The MAX5813/MAX5814/MAX5815 accept a wide supply voltage range of 2.7V to 5.5V with extremely low power (3m W) consumption to acmodate most low-voltage applications. A precision external reference input allows rail-to-rail operation and presents a 100k I (typ) load to an external reference. The MAX5813/MAX5814/MAX5815 have an I2C-patible, 2-wire interface that operates at clock rates up to 400k Hz. The DAC output is buffered and has a low supply current of less than 250FA per channel and a low offset error of Q0.5m V (typ). On power-up, the MAX5813/ MAX5814/MAX5815 reset the DAC outputs to zero, providing additional safety for applications that drive valves or other transducers which need to be off on power-up. The internal reference is initially powered down to allow use of an external reference. The MAX5813/MAX5814/ MAX5815 allow simultaneous output updates using software LOAD mands or the hardware load DAC logic input (LDAC). A clear logic input (CLR) allows the contents of the CODE and the DAC registers to be cleared asynchronously and sets the DAC outputs to zero. The MAX5813/MAX5814/ MAX5815 are available in a 14-pin TSSOP and an ultrasmall, 12-bump WLP package and are specified over the -40NC to +125NC temperature range. Benefits and Features S Four High-Accuracy DAC Channels - 12-Bit Accuracy Without Adjustment - ±1 LSB INL Buffered Voltage Output - Guaranteed Monotonic Over All Operating Conditions - Independent Mode Settings for Each DAC S Three Precision Selectable Internal References - 2.048V, 2.500V, or 4.096V S Internal Output Buffer - Rail-to-Rail...