Datasheet4U Logo Datasheet4U.com

DS3923 - High-Speed Current Mirror

General Description

The DS3923 high-speed current mirror integrates highvoltage devices necessary for monitoring the burst-mode receive power signal in avalanche photodiode (APD) biasing and optical line terminal (OLT) applications.

It provides small and large gain current mirror outputs to monitor the APD current.

Key Features

  • an external shutdown. An integrated FET is also provided which can be used to quickly clamp the high-voltage bias to ground in the case of high optical input power. The DS3923 is available in a 24-pin TQFN package and operates over an extended temperature range of -40°C to +95°C.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS3920 Fast Current Mirror Maxim Integrated Products
DS3900 Serial Communications Module Dallas Semiconducotr
DS3901 8-Bit NV Variable Resistor Maxim Integrated Products
DS3903 Triple 128-Position Nonvolatile Digital Potentiometer Maxim Integrated Products
DS3904 Triple 128-Position Nonvolatile Digital Variable Resistor/Switch Dallas Semiconducotr

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
DS3900P2 USB HID Communications Module
DS3151 Single/Dual/Triple/Quad DS3/E3/STS-1 LIUs
DS3152 Single/Dual/Triple/Quad DS3/E3/STS-1 LIUs
DS3153 Single/Dual/Triple/Quad DS3/E3/STS-1 LIUs
DS3231 Extremely Accurate I2C-Integrated RTC/TCXO/Crystal

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS3923 EVALUATION KIT AVAILABLE High-Speed Current Mirror with Sample/Hold Output General Description The DS3923 high-speed current mirror integrates highvoltage devices necessary for monitoring the burst-mode receive power signal in avalanche photodiode (APD) biasing and optical line terminal (OLT) applications. It provides small and large gain current mirror outputs to monitor the APD current. A sample/hold circuit with automatic gain selection captures the sampled signal so that an external ADC can accurately measure the signal. An adjustable current clamp limits current through the APD. The clamp also features an external shutdown. An integrated FET is also provided which can be used to quickly clamp the high-voltage bias to ground in the case of high optical input power.