Datasheet4U Logo Datasheet4U.com

MAX1268 - 12-Bit ADCs

Download the MAX1268 datasheet PDF. This datasheet also covers the MAX1266 variant, as both devices belong to the same 12-bit adcs family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX1266/MAX1268 low-power, 12-bit analog-todigital converters (ADCs) feature a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed 12-bit parallel interface.

They operate with a single +5V analog supply.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX1266-MaximIntegrated.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX126 2x4-Channel / Simultaneous-Sampling 14-Bit DAS Maxim
MAX1265 12-Bit ADCs Maxim
MAX120 500ksps / 12-Bit ADCs Maxim
MAX1200 16-Bit Self-Calibrating ADC Maxim
MAX12000 1575MHz GPS Front-End Amplifier Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX1261 12-Bit ADC
MAX1263 12-Bit ADC
MAX1266 12-Bit ADCs
MAX1267 12-Bit ADCs
MAX1202 12-Bit ADCs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2722; Rev 0; 04/03 MAX1266/MAX1268 420ksps, +5V, 6-/2-Channel, 12-Bit ADCs with +2.5V Reference and Parallel Interface General Description The MAX1266/MAX1268 low-power, 12-bit analog-todigital converters (ADCs) feature a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed 12-bit parallel interface. They operate with a single +5V analog supply. Power consumption is only 10mW at the maximum sampling rate of 420ksps. Two software-selectable powerdown modes enable the MAX1266/MAX1268 to be shut down between conversions; accessing the parallel interface returns them to normal operation. Powering down between conversions can reduce supply below 10µA at lower sampling rates.