Datasheet4U Logo Datasheet4U.com

MAX14611 - Quad Bidirectional Low-Voltage Logic-Level Translator

General Description

The MAX14611 is a quad bidirectional logic-level translator that provides the level shifting necessary to allow data transfer in a multivoltage system.

Externally applied voltages, VCC and VL, set the logic levels on either side of the device.

Key Features

  • a three-state output mode (TS). Drive TS high to connect the pullup to the powered I/O port. This allows for continuous, undisrupted I2C operation on the powered side of the device while the level translation function is off. The MAX14611 is a pin-to-pin compatible upgrade to the MAX3378E in the TDFN package. The MAX14611 features enhanced high-electrostaticdischarge (ESD) protection on all I/OVCC_ ports up to ±6kV HBM. The device operates over the -40NC to +85NC extended temperature range and i.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX146 +2.7Low-Power / 8-Channel / Serial 12-Bit ADCs Maxim
MAX1460 Low-Power / 16-Bit Smart ADC Maxim
MAX1462 Low-Voltage / Low-Power / 16-Bit Smart ADC Maxim
MAX14626 High-Voltage Reverse-Input-Capable Maxim
MAX14627 Low-Power Headset Detectors Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX14606 Overvoltage Protectors
MAX14607 Overvoltage Protectors
MAX14661 Beyond-the-Rails 16:2 Multiplexer
MAX14662 Beyond-the-Rails SPST
MAX14667 Dual USB Charger Adapter Emulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EVALUATION KIT AVAILABLE MAX14611 Quad Bidirectional Low-Voltage Logic-Level Translator General Description The MAX14611 is a quad bidirectional logic-level translator that provides the level shifting necessary to allow data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. A low-voltage logic signal present on the VL side of the device appears as a high-voltage logic signal on the VCC side of the device, and vice-versa. The device is ideal for I2C bus as well as MDIO bus applications where open-drain operation is often required. The device features a three-state output mode (TS). Drive TS high to connect the pullup to the powered I/O port.