Datasheet4U Logo Datasheet4U.com

MAX14662 - Beyond-the-Rails SPST

General Description

The MAX14662 is a serially controlled 8 x SPST switch for general purpose signal switching applications.

The number of switches makes the device useful in a wide variety of applications while serial control maximizes flexibility with minimal pins.

Key Features

  • 8 x SPST Switch.
  • Serial Control.
  • I2C with Two Address-Select Pins.
  • SPI with DOUT for Daisy Chain.
  • Independent Control of Each Switch.
  • Beyond-the-Rails.
  • ±5.5V Signal Range Independent of Supply Voltage.
  • Low Distortion Switching.
  • Total Harmonic Distortion + Noise 0.001% (typ).
  • RON Flatness 0.5mΩ (typ) Across Complete Signal Range.
  • Wide Supply Range.
  • +1.6V to +5.5V Single Supply.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX14663 Portable Medical Power Management Analog Devices
MAX146 +2.7Low-Power / 8-Channel / Serial 12-Bit ADCs Maxim
MAX1460 Low-Power / 16-Bit Smart ADC Maxim
MAX1462 Low-Voltage / Low-Power / 16-Bit Smart ADC Maxim
MAX14626 High-Voltage Reverse-Input-Capable Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX14661 Beyond-the-Rails 16:2 Multiplexer
MAX14667 Dual USB Charger Adapter Emulator
MAX14606 Overvoltage Protectors
MAX14607 Overvoltage Protectors
MAX14611 Quad Bidirectional Low-Voltage Logic-Level Translator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX14662 EVALUATION KIT AVAILABLE Beyond-the-Rails 8 x SPST General Description The MAX14662 is a serially controlled 8 x SPST switch for general purpose signal switching applications. The number of switches makes the device useful in a wide variety of applications while serial control maximizes flexibility with minimal pins. This part features Beyond-The-Rails™ capability so that ±5.5V signals can be passed with any single supply between +1.6V and +5.5V. The serial control is selectable between I2C and SPI. Both modes provide individual control of each independent switch so that any combination of switches can be applied. I2C mode provides two address select pins allowing for addressing up to four devices on a single bus.