Datasheet4U Logo Datasheet4U.com

MAX14824 - IO-Link Master Transceiver

General Description

The MAX14824 is an IO-LinkM master interface that integrates an IO-Link physical layer transceiver with an auxiliary digital input and two linear regulators.

Key Features

  • slew-rate-controlled drivers to reduce EMI. The driver is guaranteed to drive up to 300mA (min) load currents. Internal wake-up circuitry automatically determines the correct wake-up polarity, allowing for the use of simple UARTs for wake-up pulse generation. The MAX14824 is available in a 4mm x 4mm, 24-pin TQFN package with exposed pad, and operates over the extended -40NC to +105NC temperature range.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1482 Slew-Rate-Limited RS-485 Transceivers Maxim
MAX148 +2.7V to +5.25V / Low-Power / 8-Channel / Serial 10-Bit ADCs Maxim
MAX14800 High-Voltage Analog Switches Maxim Integrated Products
MAX14801 High-Voltage Analog Switches Maxim Integrated Products
MAX14802 High-Voltage Analog Switches Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX14820 IO-Link Device Transceiver
MAX14821 IO-Link Device Transceiver
MAX14826 IO-Link Device Transceiver
MAX14827 IO-Link Device Transceiver
MAX14827A IO-Link Device Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-5788; Rev 3; 5/12 EVALUATION KIT AVAILABLE MAX14824 IO-Link Master Transceiver General Description The MAX14824 is an IO-LinkM master interface that integrates an IO-Link physical layer transceiver with an auxiliary digital input and two linear regulators. High port count IO-Link master applications are supported through in-band SPI addressing, and the 12MHz SPI interface minimizes host controller access times. In-band addressing and selectable SPI addresses enable cascading up to 16 devices. The device supports all the IO-Link data rates and features slew-rate-controlled drivers to reduce EMI. The driver is guaranteed to drive up to 300mA (min) load currents.