Datasheet4U Logo Datasheet4U.com

MAX14826 - IO-Link Device Transceiver

General Description

The MAX14826 transceiver is suitable for IO-Link® devices and 24V binary sensors.

All specified IO-Link data rates are supported.

In IO-Link applications, the transceiver acts as the physical layer interface to a microcontroller running the data-link layer protocol.

Key Features

  • reverse-polarity, short-circuit, and ther.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1482 Slew-Rate-Limited RS-485 Transceivers Maxim
MAX148 +2.7V to +5.25V / Low-Power / 8-Channel / Serial 10-Bit ADCs Maxim
MAX14800 High-Voltage Analog Switches Maxim Integrated Products
MAX14801 High-Voltage Analog Switches Maxim Integrated Products
MAX14802 High-Voltage Analog Switches Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX14820 IO-Link Device Transceiver
MAX14821 IO-Link Device Transceiver
MAX14824 IO-Link Master Transceiver
MAX14827 IO-Link Device Transceiver
MAX14827A IO-Link Device Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX14826 IO-Link Device Transceiver General Description The MAX14826 transceiver is suitable for IO-Link® devices and 24V binary sensors. All specified IO-Link data rates are supported. In IO-Link applications, the transceiver acts as the physical layer interface to a microcontroller running the data-link layer protocol. Additional 24V digital inputs and outputs are provided. Two internal linear regulators generate common sensor and actuator power requirements: 5V and 3.3V. On-board C/Q and DO drivers are independentlyconfigurable for push-pull, high-side (PNP), or low-side (NPN) operation. The device detects the IO-Link C/Q wake-up condition and generates a wake-up signal on the active-low WU/THSD output.