Maxim Integrated MAX1497
The MAX1497 is a 3.5-digit (±1999 count) device and the MAX1499 is a 4.5-digit (±19,999 count) device. The MAX1497/MAX1499 do not require external precision integrating capacitors, autozero capacitors, crystal oscillators, charge pumps, or other circuitry required with dual-slope ADCs (commonly used in panel meter circuits). These devices also feature on-chip buffers for the differential signal and reference inputs, allowing direct interface with high-impedance signal sources.
| Part No. |
MAX1497 |
| Datasheet |
MAX1497
Download
|
| Manufacturer |
 Maxim Integrated |
| Description |
Single-Chip ADCs |
| Buy |
Stock & Price
|
GENERAL DESCRIPTION
The MAX1497/MAX1499 low-power, 3.5- and 4.5-digit, analog-to-digital converters (ADCs) with integrated lightemitting diode (LED) drivers operate from a single 2.7V to 5.25V power supply. They include an internal reference, a high-accuracy on-chip oscillator, and a multiplexed LED display driver. An internal charge pump generates the negative supply needed to power the integrated input buffers for single-supply operation. The ADC is configurable for either a ±2V or ±200mV input range and it outputs its conversion results to an LED and/or to a microcontroller (µC). µC communication is possible through an SPI™-/QSPI™-/MICROWIRE™compatible serial interface. In addition, they use continuous internal offset-calibration and offer >100dB rejection of 50Hz and 60Hz line noise. Other features include data hold and peak detection, overrange and underrange detection, and a user-programmable low-battery monitor. The MAX1499 is available in a 32-pin, 7mm ✕ 7mm TQFP package and the MAX1497 is available in 28-pin SSOP and 28-pin PDIP packages.
