Datasheet4U Logo Datasheet4U.com

MAX1665V - Lithium-Ion Battery Pack Protector

Download the MAX1665V datasheet PDF. This datasheet also covers the MAX1665S variant, as both devices belong to the same lithium-ion battery pack protector family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX1665 provides protection against overvoltage, undervoltage, overcharge current, and overdischarge current for 2-cell to 4-cell lithium-ion (Li+) battery packs.

Very low operating current ensures that cells are not overdischarged during long storage periods.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX1665S_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1665S Lithium-Ion Battery Pack Protector Maxim
MAX166 CMOS P-Compatible / 5s / 8-Bit ADCs Maxim
MAX1660 Digitally Controlled Fuel-Gauge Interface Maxim
MAX1661 Serial-to-Parallel/Parallel-to-Serial Converters and Load-Switch Controllers Maxim
MAX1662 Serial-to-Parallel/Parallel-to-Serial Converters and Load-Switch Controllers with SMBus Interface Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX1665X Lithium-Ion Battery Pack Protector
MAX16031 EEPROM-Based System Monitors
MAX16032 EEPROM-Based System Monitors
MAX16122 Dual Pushbutton Controllers
MAX16123 Dual Pushbutton Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX1665S/V/X 19-1605; Rev 0; 1/00 Lithium-Ion Battery Pack Protector General Description The MAX1665 provides protection against overvoltage, undervoltage, overcharge current, and overdischarge current for 2-cell to 4-cell lithium-ion (Li+) battery packs. Very low operating current ensures that cells are not overdischarged during long storage periods. The MAX1665 controls two external N-channel MOSFETs to limit the charge and discharge voltages. Charging is allowed when the per-cell voltage is below +4.3V. When the voltage on any cell rises above +4.3V (overvoltage limit), the MAX1665 turns off the charge MOSFET. This safety feature prevents overcharge of any cell within the battery pack. Discharge is allowed when the per-cell voltage is above +2.5V (undervoltage limit).