Datasheet4U Logo Datasheet4U.com

MAX1666X - Advanced Lithium-Ion Battery-Pack Protector

General Description

The MAX1666 provides complete protection against overvoltage, undervoltage, overcharge current, overdischarge current, and cell mismatch for 2-cell to 4-cell Lithium-Ion battery packs.

Key Features

  • o Overvoltage Protection Programmable Limits from +4.0V to +4.4V Accurate to ±0.5% o Undervoltage Protection Programmable Limits from +2.0V to +3.0V Accurate to ±2.5% o Cell Mismatch Protection Programmable Limits from 0 to 500mV Accurate to ±10% o Overcharge Current Protection o Overdischarge Current Protection o Low Operating Supply Current: 30µA typ o Low Standby Current: 1µA max o +28V max Input Voltage o Available in Small 16-Pin QSOP (MAX1666S) and 20-Pin QSOP (MAX1666V/X) Packages MAX166.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1666A Advanced Lithium-Ion Battery-Pack Protector Maxim Integrated Products
MAX1665V Lithium-Ion Battery Pack Protector Maxim Integrated
MAX1665X Lithium-Ion Battery Pack Protector Maxim Integrated
MAX16010 (MAX16010 - MAX16014) Overvoltage Protection/Detection Circuits Maxim Integrated Products
MAX16011 (MAX16010 - MAX16014) Overvoltage Protection/Detection Circuits Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX1666S Advanced Lithium-Ion Battery-Pack Protector
MAX1666V Advanced Lithium-Ion Battery-Pack Protector
MAX166 CMOS P-Compatible / 5s / 8-Bit ADCs
MAX1660 Digitally Controlled Fuel-Gauge Interface
MAX1661 Serial-to-Parallel/Parallel-to-Serial Converters and Load-Switch Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1465; Rev 1; 7/99 Advanced Lithium-Ion Battery-Pack Protector General Description The MAX1666 provides complete protection against overvoltage, undervoltage, overcharge current, overdischarge current, and cell mismatch for 2-cell to 4-cell Lithium-Ion battery packs. The voltage of each cell in the battery pack is checked and compared to the programmable threshold and to the other cells in the pack. The MAX1666 protects the battery pack in an overcurrent condition by disconnecting the pack from the load at a programmable limit. On-chip power MOSFET drivers control external P-channel MOSFETs to disconnect the cells from external terminals when faults occur.