Datasheet4U Logo Datasheet4U.com

MAX3797 - Low-Power Transimpedance Amplifier

General Description

The MAX3797 is a low-power transimpedance amplifier designed for optical transmission systems at data rates up to 10.3125Gbps and for use with PIN diodes.

The MAX3797 incorporates an automatic gain control (AGC) architecture providing nominal small-signal transimpedance of 5.5kω.

Key Features

  • S Stable Sensitivity Over Supply and Temperature S Up to 10.3125Gbps (NRZ) Operation S Supports No-Capacitor ROSA S AGC Gain of 5.5kω S Single 3.3V Power Supply S 105mW Power Consumption S Wide Bandwidth Current Monitor Enables RSSI-Based LOS Implementation S Die Size 1mm x 0.76mm.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX379 (MAX378 / MAX379) Fault-Protected Analog Multiplexers Maxim Integrated Products
MAX3793 1Gbps to 4.25Gbps Multirate Transimpedance Amplifier Maxim
MAX3795 1Gbps to 4.25Gbps Multirate VCSEL Driver Maxim Integrated Products
MAX3798 Low-Power SFP Limiting Amplifier and VCSEL Driver Maxim Integrated Products
MAX3799 SFP+ Multirate Limiting Amplifier And VCSEL Driver Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX3735A Low-Power SFP Laser Driver
MAX3747B Low-Power SFP Limiting Amplifiers
MAX3748A Compact 155Mbps to 3.2Gbps Limiting Amplifier
MAX3751 +3.3V / 2.125Gbps/1.0625Gbps Fibre Channel Port Bypass ICs
MAX3755 1Gbps/2Gbps Fibre Channel Quad-Port Bypass ICs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX3797 10.3Gbps, Low-Power Transimpedance Amplifier for 10GBASE-SR Applications General Description The MAX3797 is a low-power transimpedance amplifier designed for optical transmission systems at data rates up to 10.3125Gbps and for use with PIN diodes. The MAX3797 incorporates an automatic gain control (AGC) architecture providing nominal small-signal transimpedance of 5.5kω. The input-referred noise is typically 1.25µARMS, which reflects a theoretical sensitivity of –14.8dBm OMA at a bit error rate (BER) of 10-12 for a PIN (þ = 0.55, re = 3) photo detector. The small die size of 1mm x 0.76mm enables an optical subassembly using a TO-46 or TO-56 package. The MAX3797 supports low-cost ROSAs by offering stable operation with no capacitors required in the ROSA.