Datasheet4U Logo Datasheet4U.com

MAX3793 - 1Gbps to 4.25Gbps Multirate Transimpedance Amplifier

General Description

The MAX3793 transimpedance amplifier provides a compact low-power solution for applications from 1Gbps up to 4.25Gbps.

Key Features

  • 195nA input-referred noise, 3.5kΩ transimpedance gain, 2.9GHz bandwidth (CIN = 0.3pF) and 2.8mAP-P input overload. Operating from a +3.3V supply, the MAX3793 consumes only 106mW. An integrated filter resistor provides positive bias for the photodiode. These features, combined with a small die size, allow easy assembly into a TO-46 header with a photodiode. The MAX3793 also includes an average photocurrent monitor. The MAX3793 has a typical optical sensitivity of -20dBm (0.55A/W) at 4.25Gbps. Typ.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX379 (MAX378 / MAX379) Fault-Protected Analog Multiplexers Maxim Integrated Products
MAX3795 1Gbps to 4.25Gbps Multirate VCSEL Driver Maxim Integrated Products
MAX3797 Low-Power Transimpedance Amplifier Maxim Integrated
MAX3798 Low-Power SFP Limiting Amplifier and VCSEL Driver Maxim Integrated Products
MAX3799 SFP+ Multirate Limiting Amplifier And VCSEL Driver Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
max3701 2x Blue Laser Driver with Sample and Hold
MAX3735 2.7Gbps / Low-Power SFP Laser Drivers
MAX3737 Multirate Laser Driver
MAX3740 3.2Gbps SFP VCSEL Driver
MAX3741 3.2Gbps Compact SFP VCSEL Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3467; Rev 0; 10/04 1Gbps to 4.25Gbps Multirate Transimpedance Amplifier with Photocurrent Monitor General Description The MAX3793 transimpedance amplifier provides a compact low-power solution for applications from 1Gbps up to 4.25Gbps. The MAX3793 features 195nA input-referred noise, 3.5kΩ transimpedance gain, 2.9GHz bandwidth (CIN = 0.3pF) and 2.8mAP-P input overload. Operating from a +3.3V supply, the MAX3793 consumes only 106mW. An integrated filter resistor provides positive bias for the photodiode. These features, combined with a small die size, allow easy assembly into a TO-46 header with a photodiode. The MAX3793 also includes an average photocurrent monitor. The MAX3793 has a typical optical sensitivity of -20dBm (0.55A/W) at 4.25Gbps. Typical optical overload is at 4dBm.