Datasheet4U Logo Datasheet4U.com

MAX660CPA - CMOS Monolithic Voltage Converter

Download the MAX660CPA datasheet PDF. This datasheet also covers the MAX660 variant, as both devices belong to the same cmos monolithic voltage converter family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX660 monolithic, charge-pump voltage inverter converts a +1.5V to +5.5V input to a corresponding -1.5V to -5.5V output.

Using only two low-cost capacitors, the charge pump’s 100mA output replaces switching regulators, eliminating inductors and their associated cost, size, and EMI.

Key Features

  • ® Small Capacitors ® 0.65V Typ Loss at 100mA Load ® Low 120µA Operating Current ® 6.5Ω Typ Output Impedance ® Guaranteed ROUT < 15W for C1 = C2 = 10mF ® Pin-Compatible High-Current ICL7660 Upgrade ® Inverts or Doubles Input Supply Voltage ® Selectable Oscillator Frequency: 10kHz/80kHz ® 88% Typ Conversion Efficiency at 100mA (IL to GND) ______________Ordering Information PART TEMP. RANGE MAX660CPA 0°C to +70°C MAX660CSA 0°C to +70°C MAX660C/D 0°C to +70°C MAX660EPA -40°C to +85°C MAX6.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX660_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX660 Switched Capacitor Voltage Converter Texas Instruments
MAX660 Switched Capacitor Voltage Converter National Semiconductor
MAX660 CMOS Monolithic Voltage Converter Maxim
MAX6602 Five-Channel Precision Temperature Monitor Maxim Integrated Products
MAX6603 Platinum RTD-to-Voltage Signal Conditioner Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX660CSA CMOS Monolithic Voltage Converter
MAX660EPA CMOS Monolithic Voltage Converter
MAX660ESA CMOS Monolithic Voltage Converter
MAX660MJA CMOS Monolithic Voltage Converter
MAX66242 DeepCover Secure Authenticator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3293; Rev. 2; 9/96 CMOS Monolithic Voltage Converter MAX660 _______________General Description The MAX660 monolithic, charge-pump voltage inverter converts a +1.5V to +5.5V input to a corresponding -1.5V to -5.5V output. Using only two low-cost capacitors, the charge pump’s 100mA output replaces switching regulators, eliminating inductors and their associated cost, size, and EMI. Greater than 90% efficiency over most of its load-current range combined with a typical operating current of only 120µA provides ideal performance for both battery-powered and boardlevel voltage conversion applications. The MAX660 can also double the output voltage of an input power supply or battery, providing +9.35V at 100mA from a +5V input.