MAX1122 Datasheet | Maxim Integrated

19-3027; Rev 2; 8/08 1.8V, 10-Bit, 170Msps Analog-to-Digital Converter with LVDS Outputs for Wideband Applications General Description The MAX1122 is a monolithic 10-bit, 170Msps analogto-digital converter (ADC) optimized for outstanding dynamic performance at high IF frequencies up to 500MHz. The product operates with conversion rates of up to 170Msps while consuming only 460m W. At 170Msps and an input frequency of 100MHz, the MAX1122 achieves a spurious-free dynamic range (SFDR) of 72d Bc. Its excellent signal-to-noise ratio (SNR) of 57.5d B at 10MHz remains flat (within 1d B) for input tones up to 500MHz. This makes the MAX1122 ideal for wideband applications such as digital predistortion in cellular base-station transceiver systems. The MAX1122 requires a single 1.8V supply. The analog input is designed for either differential or singleended operation and can be AC- or DC-coupled. The ADC also Features a selectable on-chip divide-by-2 clock circuit, which allows the user to apply clock frequencies as high as 340MHz. This helps to reduce the phase noise of the input clock source. A differential LVDS sampling clock is remended for best performance. The converter’s digital outputs are LVDS patible, and the data format can be selected to be either two’s plement or offset binary. The MAX1122 is available in a 68-pin QFN with exposed pad (EP) and is specified over the industrial (-40°C to +85°C) temperature range. For pin-patible, higher speed versions of the MAX1122, refer to the MAX1123 (210Msps) and the MAX1124 (250Msps) data sheets. For a higher speed, pin-patible 8-bit version of the MAX1122, refer to the MAX1121 data sheet. - 170Msps Conversion Rate - SNR = 57.1d B/56.5d B at f IN = 100MHz/500MHz - SFDR = 72d Bc/63.5d Bc at f IN = 100MHz/500MHz - NPR = 53.7d B at f NOTCH = 28.8MHz - Single 1.8V Supply - 460m W Power Dissipation at 170Msps - On-Chip Track-and-Hold and Internal Reference - On-Chip Selectable Divide-by-2 Clock Input - LVDS Digital Outputs...