Datasheet4U Logo Datasheet4U.com

MAX199 - Multi-Range (4V / 2V / +4V / +2V) / +5V Supply / 12-Bit DAS with 8+4 Bus Interface

General Description

The MAX199 multi-range, 12-bit data-acquisition system (DAS) requires only a single +5V supply for operation, and converts analog signals up to ±4V at its inputs.

Key Features

  • include a 5MHz bandwidth track/hold, 100ksps throughput rate, internal/external clock, internal/external acquisition control, 8+4 parallel interface, and operation with an internal 4.096V or external reference. A hardware SHDN pin and two programmable powerdown modes (STBYPD, FULLPD) provide low-current shutdown between conversions. In STBYPD mode, the reference buffer remains active, eliminating start-up delays. The MAX199 employs a standard microprocessor (µP) interface. Its three-state data I.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1992 Quick-PWM Step-Down Controllers Maxim Integrated
MAX1993 Quick-PWM Step-Down Controllers Maxim Integrated
MAX1994 Dual Step-Down Controllers Plus Linear Regulator Controller Maxim Integrated
MAX19993 1200MHz To 1700MHz Downconversion Mixer Maxim Integrated Products
MAX19994A 1200MHz to 2000MHz Downconversion Mixer with LO Buffer/Switch Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX1997 Quintuple/Triple-Output TFT LCD Power Supplies
MAX1998 Quintuple/Triple-Output TFT LCD Power Supplies
MAX1999 High-Efficiency / Quad Output / Main Power- Supply Controllers for Notebook Computers
MAX190 Low-Power / 12-Bit Sampling ADCs
MAX1901 Low-Noise Power-Supply Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0401; Rev 0; 6/95 Multi-Range (±4V, ±2V, +4V, +2V), +5V Supply, 12-Bit DAS with 8+4 Bus Interface _______________General Description The MAX199 multi-range, 12-bit data-acquisition system (DAS) requires only a single +5V supply for operation, and converts analog signals up to ±4V at its inputs. This system provides eight analog input channels that are independently software programmable for a variety of ranges: ±VREF, ±VREF/2, 0V to VREF, or 0V to VREF/2. This increases effective dynamic range to 14 bits, and provides the user flexibility to interface 4mA-to-20mA, ±12V, and ±15V powered sensors to a single +5V system. In addition, the converter is fault-protected to ±16.5V; a fault condition on any channel will not affect the conversion result of the selected channel.