Datasheet4U Logo Datasheet4U.com

MAX350 - Serially Controlled / Low-Voltage / 8-Channel/Dual 4-Channel Multiplexers

General Description

The MAX349/MAX350 are 8-channel and dual 4-channel serially controlled multiplexers (muxes).

These muxes conduct equally well in either direction.

On-resistance (100Ω max) is matched between switches to 16Ω max and is flat (10Ω max) over the specified signal range.

Key Features

  • o SPI/QSPI,.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX35101 Time-to-Digital Converter Maxim Integrated
MAX3516 Upstream CATV Amplifiers Maxim Integrated
MAX3517 Upstream CATV Amplifiers Maxim Integrated
MAX3523 Low-Power DOCSIS 3.1 Programmable-Gain Amplifier Maxim Integrated
MAX3537 (MAX3537 / MAX3538) Broadband Variable Gain Amplifiers Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX3507 Upstream CATV Amplifier with On-Chip Anti-Alias Filter
MAX3509 Upstream CATV Amplifier
MAX351 Precision / Quad / SPST Analog Switches
MAX3510 Upstream CATV Amplifier
MAX3514 Upstream CATV Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0451; Rev 1; 10/98 Serially Controlled, Low-Voltage, 8-Channel/Dual 4-Channel Multiplexers General Description The MAX349/MAX350 are 8-channel and dual 4-channel serially controlled multiplexers (muxes). These muxes conduct equally well in either direction. On-resistance (100Ω max) is matched between switches to 16Ω max and is flat (10Ω max) over the specified signal range. These CMOS devices can operate continuously with dual power supplies ranging from ±2.7V to ±8V or a single supply between +2.7V and +16V. Each mux can handle rail-to-rail analog signals. The off-leakage current is only 0.1nA at +25°C or 5nA at +85°C. Upon power-up, all switches are off and the internal shift registers are reset to zero. The serial interface is compatible with SPI™/QSPI™ and MICROWIRE™.