Datasheet4U Logo Datasheet4U.com

MAX3509 - Upstream CATV Amplifier

General Description

The MAX3509 is a programmable power amplifier for use in CATV upstream applications.

The device outputs up to 66dBmV QPSK through a 1:1 transformer.

Key Features

  • o Ultra-Low Power-Up/Down Transients, 25mV (typ) at 66dBmV Output o Single-Supply Operation o Output Level Ranges from.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1700; Rev 0; 4/00 UAL IT MAN TION K A ET U E L H A S EV TA WS DA FOLLO Upstream CATV Amplifier Features o Ultra-Low Power-Up/Down Transients, 25mV (typ) at 66dBmV Output o Single-Supply Operation o Output Level Ranges from <12dBmV to 67dBmV (QPSK) o Gain Programmable in 1dB Steps o Low Transmit Output Noise Floor: -41dBmV (160kHz BW) o Low Transmit-Disable Output Noise: -70dBmV o Shutdown Mode General Description The MAX3509 is a programmable power amplifier for use in CATV upstream applications. The device outputs up to 66dBmV QPSK through a 1:1 transformer. It features variable gain controlled by a 3-wire digital serial bus. Gain control is available in 1dB steps. The device operates over a 5MHz to 65MHz frequency range.