Datasheet4U Logo Datasheet4U.com

MAX4510 - Rail-to-Rail / Fault-Protected / SPST Analog Switches

General Description

The MAX4510/MAX4520 single-pole/single-throw (SPST), fault-protected analog switches feature a fault-protected input and Rail-to-Rail® signal-handling capability.

Key Features

  • o ±40V Fault Protection with Power Off ±36V Fault Protection with ±15V Supplies o Switch is Off with Power Removed o Rail-to-Rail Signal Handling o 160Ω max Signal Paths with ±15V Supplies o On-Switch Turns Off with Overvoltage o 0.5nA Off-Leakage Current o Output Clamped to Appropriate Supply Voltage During Fault Condition; No Transition Glitch o No Power-Supply Sequencing Required o ±4.5V to ±20V Dual Supplies +9V to +36V Single Supply o Low Power Consumption:.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4520 SPST Analog Switches Maxim Integrated
MAX4524L (MAX4524L / MAX4525L) Single-Supply Analog Multiplexers/Switches Maxim Integrated Products
MAX4525L (MAX4524L / MAX4525L) Single-Supply Analog Multiplexers/Switches Maxim Integrated Products
MAX4534 Single 4-to-1/Dual 2-to-1 Multiplexers Maxim Integrated
MAX4535 Single 4-to-1/Dual 2-to-1 Multiplexers Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX451 CMOS Video Amplifier
MAX4511 Quad / Rail-to-Rail / Fault-Protected / SPST Analog Switches
MAX4512 Quad / Rail-to-Rail / Fault-Protected / SPST Analog Switches
MAX4513 Quad / Rail-to-Rail / Fault-Protected / SPST Analog Switches
MAX4514 Low-Voltage / Low-On-Resistance / SPST / CMOS Analog Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1542; Rev 0; 10/99 Rail-to-Rail, Fault-Protected, SPST Analog Switches General Description The MAX4510/MAX4520 single-pole/single-throw (SPST), fault-protected analog switches feature a fault-protected input and Rail-to-Rail® signal-handling capability. The normally open (NO) and normally closed (NC) terminals are protected from overvoltage faults up to 36V during power-on and 44V with power off. During a fault condition, the switch input terminal (NO or NC) becomes an open circuit; only nanoamperes of leakage current flow from the fault source, and the switch output (COM) furnishes up to 13mA of the appropriate polarity supply voltage to the load. This ensures unambiguous rail-to-rail outputs when a fault begins and ends. On-resistance is 160Ω max. The off-leakage current is only 0.