Datasheet4U Logo Datasheet4U.com

MAX4513 - Quad / Rail-to-Rail / Fault-Protected / SPST Analog Switches

General Description

The MAX4511/MAX4512/MAX4513 are quad, singlepole/single-throw (SPST), fault-protected analog switches.

They are pin-compatible with the industry-standard nonprotected DG201/DG202/DG213.

These new switches feature fault-protected inputs and Rail-to-Rail® signal handling capability.

Key Features

  • o ±40V Fault Protection with Power Off ±36V Fault Protection with ±15V Supplies o All Switches Off with Power Off o Rail-to-Rail Signal Handling o Output Clamped to Appropriate Supply Voltage During Fault Condition; No Transition Glitch o 175Ω max Signal Paths with ±15V Supplies o No Power-Supply Sequencing Required o ±4.5V to ±18V Dual Supplies +9V to +36V Single Supply o Low Power Consumption,.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4520 SPST Analog Switches Maxim Integrated
MAX4524L (MAX4524L / MAX4525L) Single-Supply Analog Multiplexers/Switches Maxim Integrated Products
MAX4525L (MAX4524L / MAX4525L) Single-Supply Analog Multiplexers/Switches Maxim Integrated Products
MAX4534 Single 4-to-1/Dual 2-to-1 Multiplexers Maxim Integrated
MAX4535 Single 4-to-1/Dual 2-to-1 Multiplexers Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX451 CMOS Video Amplifier
MAX4510 Rail-to-Rail / Fault-Protected / SPST Analog Switches
MAX4511 Quad / Rail-to-Rail / Fault-Protected / SPST Analog Switches
MAX4512 Quad / Rail-to-Rail / Fault-Protected / SPST Analog Switches
MAX4514 Low-Voltage / Low-On-Resistance / SPST / CMOS Analog Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4760; Rev 0; 6/98 Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches General Description The MAX4511/MAX4512/MAX4513 are quad, singlepole/single-throw (SPST), fault-protected analog switches. They are pin-compatible with the industry-standard nonprotected DG201/DG202/DG213. These new switches feature fault-protected inputs and Rail-to-Rail® signal handling capability. The normally open (NO_) and normally closed (NC_) terminals are protected from overvoltage faults up to 36V during power-up or power-down. During a fault condition, the NO_ or NC_ terminal becomes an open circuit and only nanoamperes of leakage current flow from the source, but the switch output (COM_) furnishes up to 10mA of the appropriate polarity supply voltage to the load.