Datasheet4U Logo Datasheet4U.com

MAX500 - CMOS / Quad / Serial-Interface 8-Bit DAC

General Description

The MAX500 is a quad, 8-bit, voltage-output digital-toanalog converter (DAC) with a cascadable serial interface.

The IC includes four output buffer amplifiers and input logic for an easy-to-use, two- or three-wire serial interface.

Key Features

  • o Buffered Voltage Outputs o Double-Buffered Digital Inputs o Microprocessor and TTL/CMOS Compatible o Requires No External Adjustments o Two- or Three-Wire Cascadable Serial Interface o 16-Pin DIP/SO Package and 20-Pin LCC o Operates from Single or Dual Supplies MAX500 ______________Ordering Information TEMP. RANGE PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5014 Current-Mode PWM Controllers Maxim Integrated
MAX5015 Current-Mode PWM Controllers Maxim Integrated
MAX5033 MAXPower Step-Down DC-DC Converter Maxim Integrated
MAX5041 Dual-Phase / Parallelable / Average Current-Mode Controllers Maxim Integrated
MAX5041A Dual-Phase / Parallelable / Average-Current-Mode Controllers Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5003 High-Voltage PWM Power-Supply Controller
MAX501 Voltage-Output / 12-Bit Multiplying DACs
MAX5012 12-Bit / 100Msps ECL DAC
MAX5013 12-Bit / 100Msps TTL DAC
MAX5018 8-Bit / High-Speed DAC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1016; Rev 2; 2/96 CMOS, Quad, Serial-Interface 8-Bit DAC _______________General Description The MAX500 is a quad, 8-bit, voltage-output digital-toanalog converter (DAC) with a cascadable serial interface. The IC includes four output buffer amplifiers and input logic for an easy-to-use, two- or three-wire serial interface. In a system with several MAX500s, only one serial data line is required to load all the DACs by cascading them. The MAX500 contains double-buffered logic and a 10-bit shift register that allows all four DACs to be updated simultaneously using one control signal. There are three reference inputs so the range of two of the DACs can be independently set while the other two DACs track each other.