Datasheet4U Logo Datasheet4U.com

MAX503 - 5V / Low-Power / Parallel-Input / Voltage-Output / 10-Bit DAC

General Description

The MAX503 is a low-power, 10-bit, voltage-output digitalto-analog converter (DAC) that uses single 5V or dual ±5V supplies.

This device has an internal voltage reference plus an output buffer amplifier.

Key Features

  • but with a serial data interface, refer to the MAX504/MAX515 data sheet. ____________________________Features o o o o o o o o o o Buffered Voltage Output Internal 2.048V Voltage Reference Operates from Single 5V or Dual ±5V Supplies Low Power Consumption: 250µA Operating Current 40µA Shutdown-Mode Current SSOP Package Saves Space Relative Accuracy: ±1/2 LSB Max Over Temperature Guaranteed Monotonic Over Temperature 4-Quadrant Multiplication with No External Components Power-On Reset Double-Buff.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5033 MAXPower Step-Down DC-DC Converter Maxim Integrated
MAX5014 Current-Mode PWM Controllers Maxim Integrated
MAX5015 Current-Mode PWM Controllers Maxim Integrated
MAX5041 Dual-Phase / Parallelable / Average Current-Mode Controllers Maxim Integrated
MAX5041A Dual-Phase / Parallelable / Average-Current-Mode Controllers Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5035 1A / 76V / High-Efficiency MAXPower Step-Down DC-DC Converter
MAX5038 Dual-Phase / Parallelable / Average Current-Mode Controllers
MAX5038A Dual-Phase / Parallelable / Average-Current-Mode Controllers
MAX500 CMOS / Quad / Serial-Interface 8-Bit DAC
MAX5003 High-Voltage PWM Power-Supply Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0279; Rev 0; 8/94 5V, Low-Power, Parallel-Input, Voltage-Output, 10-Bit DAC _______________General Description The MAX503 is a low-power, 10-bit, voltage-output digitalto-analog converter (DAC) that uses single 5V or dual ±5V supplies. This device has an internal voltage reference plus an output buffer amplifier. Operating current is only 250µA from a single 5V supply, making it ideal for portable and battery-powered applications. In addition, the shrink smalloutline package (SSOP) measures only 0.1 square inches, using less board area than an 8-pin DIP. 10-bit resolution is achieved through laser trimming of the DAC, op amp, and reference. No further adjustments are necessary. Internal gain-setting resistors can be used to define a DAC output voltage range of 0V to +2.048V, 0V to +4.