Datasheet4U Logo Datasheet4U.com

MAX5182 - 40MHz Current/Voltage Alternate-Phase Output DACs

General Description

The MAX5182 is a dual, 10-bit, alternate-phase-update, current-output digital-to-analog converter (DAC) designed for superior performance in systems requiring analog signal reconstruction with low distortion and low-power operation.

Key Features

  • o +2.7V to +3.3V Single-Supply Operation o Wide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHz o Fully Differential Outputs for Each DAC o ±0.5% FSR Gain Mismatch Between DAC Outputs o Low-Current Standby or Full Shutdown Modes o Internal +1.2V Low-Noise Bandgap Reference o Small 28-Pin QSOP Package MAX5182/MAX5185 Ordering Information PART MAX5182BEEI MAX5185BEEI TEMP. RANGE -40°C to +85°C -40°C to +85°C PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5183 Current/Voltage Simultaneous-Output DACs Maxim Integrated
MAX5185 40MHz Current/Voltage Alternate-Phase Output DACs Maxim Integrated
MAX5189 Dual / 8-Bit / 40MHz / Current/Voltage / Simultaneous-Output DACs Maxim Integrated
MAX5109 8-Bit DACs Maxim Integrated Products
MAX5113 14-Bit Current DAC Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX518 2-Wire Serial 8-Bit DACs
MAX5180 Current/Voltage Simultaneous-Output DACs
MAX5181 10-Bit / 40MHz / Current/Voltage-Output DACs
MAX5184 10-Bit / 40MHz / Current/Voltage-Output DACs
MAX5186 Dual / 8-Bit / 40MHz / Current/Voltage / Simultaneous-Output DACs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1578; Rev 0; 12/99 Dual, 10-Bit, 40MHz Current/Voltage Alternate-Phase Output DACs General Description The MAX5182 is a dual, 10-bit, alternate-phase-update, current-output digital-to-analog converter (DAC) designed for superior performance in systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5185 provides equal specifications, with on-chip output resistors for voltageoutput operation. Both devices are designed for 10pV-s glitch operation, to reduce distortion and minimize unwanted spurious signal components at the output. An on-board +1.2V bandgap circuit provides a well-regulated, low-noise reference that can be disabled for external reference operation.