MAX8698C - PMIC

Maxim Integrated (now Analog Devices)

General Description

in Page 28.

description, removed ELDO9 from the turn-off sources.

📥 Download Datasheet

MAX8698C pmic by Maxim Integrated (now Analog Devices) - Datasheet Preview

Datasheet Details

Part number	MAX8698C
Manufacturer	Maxim Integrated (now Analog Devices)
File Size	437.01 KB
Description	PMIC
Datasheet	MAX8698C Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
MAX86916	Integrated Optical Sensor	Maxim Integrated
MAX8600	Single-/Dual-Input 1-Cell Li Chargers	Maxim Integrated Products
MAX8600A	Single-Input 1-Cell Li+ Charger	Maxim Integrated Products
MAX8601	Single-/Dual-Input 1-Cell Li Chargers	Maxim Integrated Products
MAX8606	Li+ Linear Battery Charger	Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number	Description
MAX869L	P-Channel Switch
MAX860	Switched-Capacitor Voltage Converters
MAX863	Dual / High-Efficiency / PFM / Step-Up DC-DC Controller
MAX864	Dual-Output Charge Pump with Shutdown
MAX865	Compact / Dual-Output Charge Pump

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

Confidential MAX8698C, Rev08 MAX8698C PMIC Datasheet for Samsung Application Processor – S5PC100 Rev 08 Page 1/47 DO NOT COPY. DO NOT DISTRIBUTE. : 12/8/2009 Confidential MAX8698C, Rev08 Revision History Rev Date Changes 0 11/13/2008 Preliminary- Initial Release 2 2/5/2009 Power up sequence is revised. In order to control Buck1 and Buck2 by PWREN hardware pin, the I2C control registers of Buck1 and Buck2 must be set to 0 after power up. LDO6 default voltage is changed to 2.6V. LDO5 default voltage is changed to 2.8V. No Load Supply Current 2 is revised 3 2/18/2009 Load Regulation for LDO4/LDO9 changed to 25mV from 40mV 4 3/10/2009 Part number is changed to MAX8698CEWO+T 5 5/7/2009 No load supply current 2 has been updated.