MG82F6D16 Datasheet | Megawin

8051-Based MCU MG82F6D16 Data Sheet Version: 0.50 This document contains information on a new product under development by Megawin. Megawin reserves the right to change or discontinue this product without notice.  Megawin Technology Co., Ltd. 2021 All rights reserved. 2021/03 version 0.50 Version: 0.50 megawin Features - 1-T 80C51 Central Processing Unit - MG82F6D16 with 16K Bytes flash ROM ━ ISP memory zone could be optioned as 0.5KB/1.0KB~7.5KB ━ Flexible IAP size configured by software ━ Code protection for flash memory Access ━ Flash write/erase cycle: 20,000 ━ Flash data retention: 100 years at 25°C ━ Default MG82F6D16 Flash space mapping  AP Flash default mapping (13.5KB, 0000h~35FFh)  IAP Flash default mapping (1.0KB, 3600h~39FFh)  ISP Flash default mapping (1.5KB, 3A00h~3FFFh), ISP Boot code - Data RAM: 1K Bytes ━ On-chip 256 bytes scratch-pad RAM ━ 768 bytes expanded RAM (XRAM) for 6D16 ━ Support page select on XRAM Access in 6D16 - Dual data pointer - Interrupt controller ━ 14 sources, four-level-priority interrupt capability ━ Three external interrupt inputs, n INT0, n INT1 and n INT2, with glitch filter ━ All external interrupts support High/Low level or Rising/Falling edge trigger - Total 6 timers in MG82F6D16 ━ RTC Timer and WDT Timer ━ Timer 0, Timer 1 and Timer 2 ━ PCA0, Program Counter Array 0 ━ If Timer 2 in split mode, then total 7 timers - Three 16-bit timer/counters, Timer 0, Timer 1 and Timer 2 ━ X12 mode and timer clock output function ━ New 5 operating modes in Timer 2 with 8 clock sources and 8 capture sources ━ Timer 2 can be split into two 8-bit timers ━ Clock Count Output (CCO) on T2CKO ━ All timers support PWM mode - One Programmable 16-bit counter/timer Arrays (PCA0) with 6 CCP modules ━ PCA0 has 6 CCP (Capture/pare/PWM) modules ━ Reloadable 16-bit base counter to support variable length PWM ━ Up to 100MHz clock source from on-chip CKM ━ Capture mode, 16-bit software timer mode and High speed output...