MIC23060 Overview
Sequenced Power Management IC with HyperLight Load™ DC/DC and Dual Input LDO™ General Features The MIC23060 is a highly efficient power management IC integrating a high frequency DC/DC converter with HyperLight Load™ mode and a low input voltage capable LDO. The MIC23060 offers two output voltages at very high efficiency on both outputs while maintaining a low total system cost. The MIC23060 also provides sequencing of the two outputs in every potential bination of turn-on and turnoff sequencing by connecting two pins either high or low, and using a single GPIO to enable and disable the device. The LDO is designed both to post regulate from the output of the DC/DC converter for high system efficiency, and/or power directly from the battery. For sequences where the LDO is enabled prior to the DC/DC output, the LDO is first powered by the input voltage (typically the battery source) and...
MIC23060 Key Features
- 2.7V to 5.5V supply voltage range
- Tiny 12-pin 2.5mm x 2.5mm Thin MLF® package
- Integrated sequencing
- Dual Input LDO™ can turn-on prior to DC/DC converter and automatically switch to post regulation from the DC/DC converte
- Power for LDO from input during start-up
- Adjustable delay time between outputs
- Zero-current off mode
- Current-limit and thermal shutdown protection HyperLight Load™ DC/DC Converter
- Up to 600mA output current in PWM mode (shared between switcher and linear LDO regulator outputs)
- 4MHz frequency in continuous PWM mode