Datasheet4U Logo Datasheet4U.com

SY100EL90V - 5V/3.3V TRIPLE ECL/LVECL-TOPECL/ LVPECL TRANSLATOR

General Description

The SY100EL90V is a triple ECL/LVECL-to-PECL/ LVPECL translator.

The device can translate over all combinations of supply voltages: -5V ECL to 5V PECL, -5V ECL to 3.3V LVPECL, -3.3V LVECL to 5V PECL or -3.3V LVECL to 3.3V LVPECL.

Key Features

  • s 3.3V and 5V power supply options s 500ps propagation delay s Fully differential design s Supports both standard and low voltage operation s Available in 20-pin SOIC package.

📥 Download Datasheet

Datasheet Details

Part number SY100EL90V
Manufacturer Micrel Semiconductor
File Size 53.85 KB
Description 5V/3.3V TRIPLE ECL/LVECL-TOPECL/ LVPECL TRANSLATOR
Datasheet download datasheet SY100EL90V Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SY100EL11V 5V/3.3V ECL 1:2 Differential Fanout Buffe Microchip
SY100EL16S 5V VARIABLE OUTPUT SWING DIFFERENTIAL RECEIVER Synergy
SY100EL16V 5V/3.3V ECL Differential Receiver Microchip
SY100EL16VS 3.3V/5V Variable Output Swing Differential Receiver Microchip
SY100EL29V 5V/3.3V Dual Differential Data and Clock D Flip-Flop Microchip

Other Datasheets by Micrel Semiconductor

Part Number Description
SY100EL91L 3.3V TRIPLE LVPECL-to-ECL OR LVPECL-to-LVECL TRANSLATOR
SY100EL92 TRIPLE LVPECL-TO-PECL OR PECL-TO-LVPECL TRANSLATOR
SY100EL01 4-INPUT OR/NOR
SY100EL04 2-INPUT AND/NAND
SY100EL05 2-INPUT DIFFERENTIAL AND/NAND

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Micrel, Inc. 5V/3.3V TRIPLE ECL/LVECL-TOPECL/LVPECL TRANSLATOR SY100EL90V SY100EL90V FEATURES s 3.3V and 5V power supply options s 500ps propagation delay s Fully differential design s Supports both standard and low voltage operation s Available in 20-pin SOIC package DESCRIPTION The SY100EL90V is a triple ECL/LVECL-to-PECL/ LVPECL translator. The device can translate over all combinations of supply voltages: -5V ECL to 5V PECL, -5V ECL to 3.3V LVPECL, -3.3V LVECL to 5V PECL or -3.3V LVECL to 3.3V LVPECL. A VBB output is provided for interfacing with single ended ECL signals at the input. If a single ended input is to be used, the VBB output should be connected to the D input. The active signal would then drive the D input. When used, the VBB output should be bypassed to via a 0.