MIC4479 Datasheet | Micrel Semiconductor

Description The MIC4478, MIC4479, and MIC4480 are low-side dual MOSFET drivers are designed to switch N-channel enhancement type MOSFETs from TTL-patible control signals for low-side switch applications. The MIC4478 is dual non-inverting, the MIC4479 is dual inverting, and the MIC4480 is plimentary non-inverting and inverting. These drivers feature short delays and high peak currents to produce precise edges and rapid rise and fall times. The MIC4478/4479/4480 are powered from a +4.5V to +32V supply voltage. The on-state gate drive output voltage is approximately equal to the supply voltage (no internal regulators or clamps). In a low-side configuration, the drivers can control a MOSFET that switches any voltage up to the rating of the MOSFET. The MIC4478/4479/4480 are available in the 8lead SOIC (e PAD and non-e PAD) package and are rated for the - 40°C to +125°C ambient temperature range. Datasheets and support documentation are available on Micrel’s web site at: .micrel.. Features - +4.5V to +32V operation - 300µA typical supply quiescent current - 2.5A nominal peak output per channel - 6Ω high-side typical output resistance - 3Ω low-side typical output resistance - Active-high driver enable inputs with internal pull-ups - Operates with low-side switch circuits - - 40°C to +125°C ambient temperature range - ESD protection - Dual inverting, dual non-inverting, and inverting + noninverting versions - 8-pin SOIC (e PAD and non-e PAD) Applications - Synchronous switch-mode power supplies - Secondary side synchronous rectification Typical Application Micrel Inc. - 2180 Fortune Drive - San Jose, CA 95131 - USA - tel +1 (408) 944-0800 - fax + 1 (408) 474-1000 - http://.micrel. December 9, 2014 Revision 1.0 Micrel, Inc. Ordering Information Part Number MIC4478YM MIC4478YME MIC4479YM MIC4479YME MIC4480YM MIC4480YME Marking 4478YM 4478YME 4479YM 4479YME 4480YM 4480YME Configuration Dual Non-Inverting Dual Non-Inverting Dual Inverting Dual Inverting Inverting +...