PIC18C801 Datasheet | Microchip Technology

Features : - 10-bit Analog-to-Digital Converter module (A/D) with: - Fast sampling rate - Conversion available during SLEEP - DNL = ±1 LSb, INL = ±1 LSb - Up to 12 channels available - Programmable Low Voltage Detection (LVD) module - Supports interrupt on Low Voltage Detection PIC18C601 PIC18C801 1.5K 1.5K Special Microcontroller Features : - Power-on Reset (POR), Power-up Timer (PWRT), and Oscillator Start-up Timer (OST) - Watchdog Timer (WDT) with its own on-chip RC oscillator - On-chip Boot RAM for boot loader application - 8-bit or 16-bit external memory interface modes - Up to two software programmable chip select signals (CS1 and CS2) - One programmable chip I/O select signal (CSIO) for memory mapped I/O expansion - Power saving SLEEP mode - Different oscillator options, including: - 4X Phase Lock Loop (of primary oscillator) - Secondary Oscillator (32 k Hz) clock input - Up to 160 ns instruction cycle: - DC - 25 MHz clock input - 4 MHz - 6 MHz clock input with PLL active - 16-bit wide instructions, 8-bit wide data path - Priority levels for interrupts - 8 x 8 Single Cycle Hardware Multiplier Peripheral Features : - - - - - - - - - High current sink/source 25 m A/25 m A Up to 47 I/O pins with individual direction control Three external interrupt pins Timer0 module: 8-bit/16-bit timer/counter with 8-bit programmable prescaler Timer1 module: 16-bit timer/counter (time-base for CCP) Timer2 module: 8-bit timer/counter with 8-bit period register Timer3 module: 16-bit timer/counter Secondary oscillator clock option - Timer1/Timer3 Two Capture/pare/PWM (CCP) modules CCP pins can be configured as: - Capture input: 16-bit, max. resolution 10...