MCP2562FD Overview
High-Speed CAN Flexible Data Rate Transceiver Features: • Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation - Maximum Propagation Delay: 120 ns - Loop Delay Symmetry: -10%/+10% (2 Mbps) • Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements • Very Low Standby Current (5 µA, typical) • VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O • SPLIT Output Pin to Stabilize mon Mode in Biased Split Termination Schemes • CAN Bus Pins are Disconnected when Device is Unpowered - An Unpowered Node or Brown-Out Event will Not Load the CAN Bus • Detection of Ground Fault: - Permanent Dominant Detection on TXD
MCP2562FD Key Features
- Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation
- Maximum Propagation Delay: 120 ns
- Loop Delay Symmetry: -10%/+10% (2 Mbps)
- Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements
- Very Low Standby Current (5 µA, typical)
- VIO Supply Pin to Interface Directly to
- SPLIT Output Pin to Stabilize mon Mode in Biased Split Termination Schemes
- CAN Bus Pins are Disconnected when Device is Unpowered
- An Unpowered Node or Brown-Out Event will
- Detection of Ground Fault