SY100EL16VS Datasheet | Microchip Technology

3.3V/5V Variable Output Swing Differential Receiver Features - 3.3V and 5V Power Supply Options - High Bandwidth Output Transitions - Internal 75 kΩ Pull-Down Resistors on D Inputs - Functionally Equivalent to SY100EL16V with Variable Output Swing - Improved Output Waveform Characteristics - Available in 8-Pin (3 mm) MSOP Package Package Type SY100EL16VS 8-Pin MSOP VCTRL 1 D2 /D 3 VBB 4 8 VCC 7Q 6 /Q 5 VEE General Description The SY100EL16VS is a differential receiver with variable output swing. The device is functionally equivalent to the EL16V device with an input that controls the amplitude of the outputs. The operational range of the EL16VS control input is from VBB (max. swing) to VCC (min. swing). Simple control of the output swing can be obtained by a variable resistor between the VBB pin and VCC with the wiper driving VCTRL. The EL16VS provides a VBB output for either single ended use or as a DC bias for AC coupling to the device. The VBB pin should be used only as a bias for the EL16VS as its current sink/source capability is limited. Whenever used, the VBB pin should be bypassed to ground via a 0.01 μF capacitor. Under open input conditions (pulled to VEE), internal input clamps will force the Q output LOW.  2019 Microchip Technology Inc. DS20006240A-page 1 1.0 ELECTRICAL CHARACTERISTICS...