MT29F1G08ABBDAH4 Overview
Key Specifications
Mount Type: Surface Mount
Pins: 63
Operating Voltage: 1.8 V
Max Voltage (typical range): 1.95 V
Key Features
- Open NAND Flash Interface (ONFI) 1.0-compliant1
- Single-level cell (SLC) technology
- Asynchronous I/O performance – tRC/tWC: 20ns (3.3V), 25ns (1.8V)
- Array performance – Read page: 25µs3 – Program page: 200µs (TYP, 3.3V and 1.8V)3 – Erase block: 700µs (TYP)
- Command set: ONFI NAND Flash Protocol
- Operation status byte provides software method for detecting – Operation completion – Pass/fail condition – Write-protect status
- Internal data move operations supported within the device from which data is read
- Ready/busy# (R/B#) signal provides a hardware method for detecting operation completion
- WP# signal: write protect entire device
- First block (block address 00h) is valid when shipped from factory with ECC. For minimum required ECC, see Error Management
