N25Q032A11EF840x Datasheet | Micron Technology

32Mb, 1.8V, Multiple I/O Serial Flash Memory Features Micron Serial NOR Flash Memory 1.8V, Multiple I/O, 4KB Sector Erase N25Q032A11E124xx, N25Q032A11EF440x, N25Q032A11ESE40x, N25Q032A11ESF40x, N25Q032A11EF840x, N25Q032A11EF640x Features - - - - - - SPI-patible serial bus interface 108 MHz (MAX) clock frequency 1.7- 2.0V single supply voltage Dual/quad I/O instruction provides increased throughput up to 432 MHz Supported protocols - Extended SPI, dual I/O, and quad I/O Execute-in-place (XIP) mode for all three protocols - Configurable via volatile or nonvolatile registers - Enables memory to work in XIP mode directly after power-on PROGRAM/ERASE SUSPEND operations Continuous read of entire memory via a single mand - Fast read - Quad or dual output fast read - Quad or dual I/O fast read Flexible to fit application - Configurable number of dummy cycles - Output buffer configurable Software reset 64-byte, user-lockable, one-time programmable (OTP) dedicated area Erase capability - Subsector erase 4KB uniform granularity blocks - Sector erase 64KB uniform granularity blocks - Full-chip erase - Write protection - Software write protection applicable to every 64KB sector via volatile lock bit - Hardware write protection: protected area size defined by four nonvolatile bits (BP0, BP1, BP2, and TB) - Additional smart protections, available upon request - Electronic signature - JEDEC-standard 2-byte signature (BB16h) - Unique ID code (UID): 17 read-only bytes, including: - Two additional extended device ID (EDID) bytes to identify device factory options - Customized factory data (14 bytes) - Minimum 100,000 ERASE cycles per sector - More than 20 years data retention - Packages JEDEC standard, all Ro HS pliant - F4 = UF-PDFN-8 4mm x 3mm (MLP8 4mm x...