N25Q128A Datasheet | Micron Technology

Features Micron Serial NOR Flash Memory 1.8V, Multiple I/O, 4KB Sector Erase N25Q128A Features - SPI-patible serial bus interface - 108 MHz (MAX) clock frequency - 1.7- 2.0V single supply voltage - Dual/quad I/O instruction provides increased throughput up to 432 MHz - Supported protocols - Extended SPI, dual I/O, and quad I/O - Execute-in-place (XIP) mode for all three protocols - Configurable via volatile or nonvolatile registers - Enables memory to work in XIP mode directly af- ter power-on - PROGRAM/ERASE SUSPEND operations - Continuous read of entire memory via a single - mand - Fast read - Quad or dual output fast read - Quad or dual I/O fast read - Flexible to fit application - Configurable number of dummy cycles - Output buffer configurable - Software reset - 64-byte, user-lockable, one-time programmable (OTP) dedicated area - Erase capability - Subsector erase 4KB uniform granularity blocks - Sector erase 64KB uniform granularity blocks - Full-chip erase - Write protection - Software write protection applicable to every 64KB sector via volatile lock bit - Hardware write protection: protected area size defined by five nonvolatile bits (BP0, BP1, BP2, BP3, and TB) - Additional smart protections, available upon request - Electronic signature - JEDEC-standard 2-byte signature (BB18h) - Unique ID code (UID): 17 read-only bytes, including: - Two additional extended device ID (EDID) bytes to identify device factory options - Customized factory data (14 bytes) - Minimum 100,000 ERASE cycles per sector - More than 20 years data retention - Packages JEDEC standard, all Ro HS...