1N4760AUR Datasheet | Microsemi

DESCRIPTION This surface mountable 1 watt Zener diode series is electrically equivalent to the 1N4728A thru 1N4764A registration in the DO-41 equivalent package except that it meets the JEDEC surface mount outline DO-213AB. It is an ideal selection for applications of high density and low parasitic requirements for voltage regulation. Standard voltage tolerance is +/- 5% with tighter tolerances available down to 1%. With its glass hermetic qualities, it may also be used for high reliability applications when required by a source control drawing (SCD). IMPORTANT: For the most current data, consult MICROSEMI’s website: http://.microsemi. APPEARANCE DO-213AB FEATURES - Electrically similar to the JEDEC registered 1N4728 thru 1N4764 zener series - Zener voltages available 3.3V to 100V - Standard voltage tolerances are +/- 5% with “A” suffix and 10 % with no suffix identification - Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively - Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers. - Surface mount equivalents also available as SMAJ4728A to SMAJ4764A and SMAJ4728A to SMAJ4764A - Ro HS pliant devices also available by adding e3 suffix - Plastic body axial-leaded Zener equivalents are also available as 1N4728A to 1N4764A APPLICATIONS / BENEFITS - Regulates voltage over a broad operating current and temperature range - Wide selection from 3.3 to 100 V - Leadless package for surface mounting - Ideal for high density mounting - Nonsensitive to ESD - Hermetically sealed glass package - Specified capacitance (see Figure 2) - Inherently radiation hard per Micro Note 050 MAXIMUM RATINGS - Power dissipation at 25ºC: 1.0 watts (also see derating in Figure 1). - Operating and Storage temperature: -65ºC to +175ºC - Thermal Resistance: 50 ºC/W junction to end cap, or 130ºC/W junction to ambient when mounted on FR4 PC board (1 oz...