SMBJ5335B Datasheet | Microsemi

DESCRIPTION The SMBJ5333B - SMBJ5388B series of surface mount 5.0 watt Zeners provides a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part number. It is equivalent to the JEDEC registered 1N5333 thru 1N5388B with identical electrical characteristics and testing. These parts are available with either Sn/Pb plating or a Ro HS pliant matte-tin finish. This J-bend design (SMBJ) in the DO-214AA allows for greater PC board mounting density. These plastic encapsulated Zeners have a moisture classification of “Level 1” with no dry pack required. Microsemi also offers numerous other Zener products to meet higher and lower power applications. Important: For the latest information, visit our website http://.microsemi.. FEATURES - Surface mount equivalent to JEDEC registered 1N5333 thru 1N5388 series. - Ideal for high-density and low-profile mounting. - Zener voltage available 3.3 V to 200 V. - Plus/minus 10%, 5% and 2% voltage tolerances are available. (See part nomenclature block.) - Ro HS pliant versions available. DO-214AA J-Bend Package NOTE: All SMB series are equivalent to prior SMS package identifications. Also available in: DO-215AA Package (Gull-wing surface mount) SMBG5333 - SMBG5388 T-18 Package (axial-leaded) 1N5333 - 1N5388 APPLICATIONS / BENEFITS - Regulates voltage over broad operating current and temperature ranges. - Wide selection from 3.3 to 200 V. - Non-sensitive to ESD per MIL-STD-750 method 1020. - Withstands high surge stresses. - Minimal changes of voltage versus current. - High specified maximum current (IZM) with adequate heat sinking. - Moisture classification is “Level 1” per IPC/JEDEC J-STD-020B with no dry pack required. MAXIMUM RATINGS Parameters/Test Conditions Junction and Storage Temperature Thermal Resistance Junction-to-Lead Thermal Resistance Junction-to-Ambient (1) Off-State Power Dissipation @ 25 o C (2) Forward Voltage @ 1.0 A Solder Temperature @ 10 s Symbol TJ and TSTG R ӨJL R ӨJA...