ZL30154 Datasheet | Microsemi

Features - Supports requirements of ITU-T G.8262 for Synchronous Ethernet Equipment Slave Clocks (EEC option 1 and 2) - Supports requirements of Telcordia GR-1244 Stratum 3 and GR-253, ITU-T G.813, and G.781 SETS - Supports ITU-T G.823, G.824 and G.8261 for 2048 kbit/s and 1544 kbit/s interfaces - Programmable synthesizers generate any clockrate from 1 Hz to 750 MHz - Two precision synthesizers generate clocks with jitter below 0.7 ps RMS for 10 G PHYs - Two general purpose synthesizers generate a wide range of digital bus clocks - Programmable digital PLLs synchronize to any clock rate from 1 Hz to 750 MHz - Flexible two-stage architecture translates between arbitrary data rates, line coding rates and FEC rates Synchronous Ethernet Network Synchronization DPLL Data Sheet March 2015 Ordering Information ZL30154GGG2 100 Pin LBGA- Trays - Pb Free Tin/Silver/Copper -40o C to +85o C - Digital PLLs filter jitter from 0.1 m Hz, 1 m Hz, 10 m Hz, 0.1 Hz, 1.7 Hz, 3.6 Hz, 7 Hz, 14 Hz, 28 Hz, 56 Hz, 112 Hz, 224 Hz, 448 Hz or 896 Hz - Automatic hitless reference switching and digital holdover on reference fail - Four reference inputs configurable as single ended or differential - Eight LVPECL outputs and four LVCMOS outputs - Eight outputs configurable as LVCMOS or LVDS/LVPECL/HCSL - Operates from a single crystal resonator or clock oscillator - Customer defined default device configuration, including input/output frequencies, is available via OTP(One Time Programmable) memory Figure 1 - Functional Block Diagram Microsemi Corporation Copyright 2015, Microsemi Corporation. All Rights Reserved. - Dynamically configurable via SPI/I2C interface and volatile configuration registers Applications - 10 Gigabit line cards - Synchronous Ethernet, 10GBASE-R and 10GBASE-W - OTN multiplexers and transponders - SONET/SDH, Fibre Channel, XAUI Data Sheet Microsemi Corporation Data Sheet Table of Contents 1.0 Pin Diagram -...