SP8861HP - 13GHz Low Power Single-Chip Frequency Synthesiser

Product Overview

Mitel Networks

Datasheet Details

Part number	SP8861HP
Manufacturer	Mitel Networks
File Size	200.62 KB
Description	13GHz Low Power Single-Chip Frequency Synthesiser
Datasheet	SP8861HP Datasheet
Additional preview pages of the SP8861HP datasheet.

Product details

Description

Prescaler and AM Counter The programmable divider chain is of AM counter design and therefore contains a dual modulus front end prescaler, an A counter which controls the dual modulus ratio and an M counter which controls the bulk multi-modulus division.A programmable divider of this type has a division ratio of MN1A and a minimum integer steppable division ratio of N(N21).In the SP8861, the dual modulus front end prescaler is a dual N ratio device, capable of being statically switched between

Features

s Improved Digital Phase Detector Eliminates ‘Dead Band’ Effects s Low Operating Power, Typically 175mW s 1.
3GHz Operating Frequency s Complete Phase Locked Loop s High Input Sensitivity s Programmed throughThree-Wire Bus s Wide Range of Reference Division Ratios s Local Storage for Two Frequency Words, giving Rapid Frequency Toggling s Programmable Phase Detector Gain s Power Down Mode.

📁 Similar Datasheet

SP8861 - Low Power Single-Chip Frequency Synthesiser (Zarlink Semiconductor)
SP886 - DECT RF Filters (SIPAT)
SP8802 - Modulus Divider (Zarlink Semiconductor)
SP8803 - Modulus Divider (Zarlink Semiconductor)
SP8804 - Modulus Divider (Zarlink Semiconductor)
SP8808 - Modulus Divider (Zarlink Semiconductor)
SP880S - 8.0AMP Schottky Barrier Rectifiers (SeCoS)
SP880S - Schottky Barrier Rectifiers (Eris)

Other Datasheets by Mitel Networks

SP8861 - 13GHz Low Power Single-Chip Frequency Synthesiser
SP8861NAHP - 13GHz Low Power Single-Chip Frequency Synthesiser
SP8802 - 3.3GHz 2 fixed Modulus Divider
SP8802A - 3.3GHz 2 fixed Modulus Divider
SP8802ADG - 3.3GHz 2 fixed Modulus Divider
SP8804 - 3.3GHz 4 fixed Modulus Divider

Published: Jun 7, 2005 |