Datasheet4U Logo Datasheet4U.com

SP8910KG - 5GHZ 10 Fixed Modulus Divider

Key Features

  • G Very High Operating Speed G Operation down to DC with Square Wave Input G Silicon Technology for Low Phase Noise Absolute Maximum Ratings Supply voltage, VCC 6.
  • 5V Storage temperature 265°C to 1150°C Maximum junction temperature 1150°C Prescaler input voltage 2.
  • 5Vp-p Operating temperature KG240°C to 185°C TCASE (Typically better than 2140dBc/Hz at 1KHz) G 5V Single Supply Operation G Low Power Dissipation: 340mW (Typ. ) G Surface Mount Plastic Package VCC 1 OUTPUT VCC 8 100 100 7 6.

📥 Download Datasheet

Datasheet Details

Part number SP8910KG
Manufacturer Mitel Networks
File Size 96.02 KB
Description 5GHZ 10 Fixed Modulus Divider
Datasheet download datasheet SP8910KG Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP8916 5GHZ/ 16 Fixed Modulus Divider Zarlink Semiconductor
SP8902 5GHZ/ 2 Fixed Modulus Divider Zarlink Semiconductor
SP8906 500MHZ 4 MODULUS DIVIDER ETC
SP8908 5GHZ/ 8 Fixed Modulus Divider Zarlink Semiconductor
SP8921 (SP8921 - SP8923) 40-Channel Citizens Band Synthesiser IC GEC Plessey Semiconductors

Other Datasheets by Mitel Networks

Part Number Description
SP8910KGMP1S 5GHZ 10 Fixed Modulus Divider
SP8910KGMP1T 5GHZ 10 Fixed Modulus Divider
SP8910 5GHZ 10 Fixed Modulus Divider
SP8916 5GHZ 16 Fixed Modulus Divider
SP8916KG 5GHZ 16 Fixed Modulus Divider

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SP8910 (MP) 5GHZ 410 Fixed Modulus Divider Preliminary Information DS4360 Issue 1.3 September 1999 The SP8910 is one of a range of very high speed low power prescalers for professional applications. The dividing elements are static D type flip flops and therefore allow operation down to DC if the drive signal is a pulse waveform with fast risetime. The output stage has internal100 ohm pull up resistors, giving a 0·5V p-p output. If required, an external 100 ohm can be connected in parallel to give a 50 ohm output.