FU-319SPP-C6 Datasheet | Mitsubishi Electric

DESCRIPTION FU-319SPP-C6 is In Ga As pin photodiode module with Ga As preamplifier, designed for use in highspeed, long haul optical munication systems. The coaxial package contains an In Ga As pin photodiode coupled with single-mode fiber pigtail and Ga As preamplifier. FEATURES - High-sensitivity (-23d Bm typ) - 5pin coaxial package - Selectable single power supply voltage (+5V or 5.2V). (In Ga As pin photodiode and Ga As preamplifier are isolated from the case.) - Ga As preamplifier with AGC function - Differential output (50Ω ) APPLICATION 2.5Gbps.optical receiver (OC-48, STM-16) Extended reach data and tele applications Long haul optical munication systems ABSOLUTE MAXIMUM RATINGS (Tc=25° C) Parameter Symbol PD Reverse voltage VPD PD Reverse current (CW) Ir PD Forward current (CW) If Power supply voltage Operating case temperature Storage temperature VDD Tc Tstg Conditions VSS=0V VSS=0V - Rating 20 4 2 0~7 -40~+85 -40~+85 Unit V m A m A V ° C ° C MITSUBISHI (OPTICAL DEVICES) In Ga As PD PREAMP MODULE FOR THE 1.31 µm AND 1.55 µm WAVELENGTH RANGE ELECTRICAL/OPTICAL CHARACTERISTICS (Tc=25° C,λ =1.3µm,VDD=5V,VSS=0V unless otherwise noted) Parameter Symbol Test Conditions Limits Unit Min. Typ. Max. Detection range 1000 1600 nm Responsivity(Note 1) R CW 0.70 0.85 A/W 1.5 Transimpedance Zt(off) AC,f=100MHz kΩ AGC_off (Note 1) Zt(on) AC,f=100MHz 0.2 AGC_on Cutoff frequency fc_High 1.8 GHz AC,RL=50Ω fc_Low 100 k Hz AC,RL=50Ω Average input equivalent in 6.5 p A/ AC,RL=50Ω ,1MHz~1.8GHz noise current density √Hz Output impedance Zo (Differential output) 50 Ω d Bm Sensitivity Pr -23 -21 AC,RL=50Ω , NRZ, 2.48832Gbps., PRBS=2^23-1, BER=10^-10, 0 2 Over load power Po VPD=5V (Note 2) Power supply voltage VDD VSS=0V 4.75 5 5.46 V Power supply current IDD VDD=5V 35 60 m A Optical return loss Prtn 25 d B Note 1. Transimpedance value apply when AGC(Bit by bit) function is fully off. Note 2. Used post-amp bandwidth is 1.8GHz, Laser souse extinction ratio is 10d B. OPTICAL FIBER...