M61311SP Datasheet | Mitsubishi Electric

DESCRIPTION M61311SP/M61316SP is Semiconductor Integrated Circuit for CRT Display Monitor. It includes OSD Blanking, OSD Mixing, Retrace Blanking, Video Detector, Sync Separator, Wide Band Amplifier, Brightness Control. Main/Sub Contrast, Video Response Adjust, Ret BLK Adjust, 4ch D/A OUT and OSD level Adjust Function can be controlled by IIC Bus. PIN CONFIGURATION GND 1 R IN 2 VCC1(12V) 3 32 BRIGHT 31 ABL IN 30 R OUT 29 VCC2(12V) 28 G OUT 27 GND4 26 B OUT 25 NC(GND) 24 D/A OUT 4 23 D/A OUT 3 22 D/A OUT 2 21 D/A OUT 1 20 SCL 19 SDA 18 Clamp Pulse IN 17 Retrace BLK IN M61311SP/M61316SP G IN 4 Son G IN 5 GND1(12V) 6 7 9 FEATURES Frequency Band Width RGB: OSD: Input RGB: OSD: OSD BLK: Retrace BLK: Clamp Pulse: Output RGB: 5Vp-p (at Brightness less than 2VDC) OSD: 4Vp-p (at Brightness less than 2VDC) Sync OUT: 5Vp-p Video Det OUT: High = 4.2VDC , Low = 0.7VDC 0.7Vp-p (typical) 3.5V --- 5.0V (positive) 3.5V --- 5.0V (positive) 2.5V --- 5.0V (positive) 2.5V --- 5.0V (positive) 200MHz (M61311SP) 150MHz (M61316SP) (4Vp-p at -3d B) 80MHz B IN Sync Sepa OUT GND2 8 Video Det OUT 10 VCC3(5V) 11 OSD BLK IN 12 OSD R IN 13 OSD G IN 14 OSD B IN 15 GND3 16 Package : 32P4B NC:NO CONNECTION STRUCTURE Bipolar Silicon Monolithic IC 32 pin plastic SDIP APPLICATION CRT Display Monitor REMENDED OPERATING CONDITIONS Supply Voltage Range Rated Supply Voltage 11.50V --- 12.50V (V3,V29) 4.75V --- 5.25V (V11) 12.00V (V3,V29) 5.00V (V11) MAJOR SPECIFICATION IIC Bus Controlled 3ch Video Pre-Amp with OSD Mixing Function and Retrace Blanking Function. The difference in the M61311SP/M61316SP is RGB Video Frequency Band Width. M61311SP is 200MHz, M61316SP is 150MHz in conditions RGB Output is 4Vp-p at -3d B. MITSUBISHI ELECTRIC MITSUBISHI ICs (MONITOR) M61311SP/M61316SP I C BUS CONTROLLED VIDEO PRE-AMP FOR HIGH RESOLUTION COLOR DISPLAY ABSOLUTE MAXIMUM RATING (Ambient temperature:25deg) Parameter Supply voltage (Pin3,29) Supply voltage (Pin11) Power dissipation Ambient temperature...