M61516FP Datasheet | Mitsubishi Electric

FEATURE FUNCTION FEATURE Electronic Volume (1)8 channel Independent Electronic Volume with High Voltage Transistor. (0~-92d B/1d Bstep,-95,- d B) .. (2)Built-in Zero-Crossing Detector Circuit for reduce click noise at changing volume value. Tone Control Input Selector (1)Bass/Treble,0~ 10d B/2d Bstep (2)Add a Bypass Mode/Tone Mode changing SW (1)Front L/R channel 10 Input Selector (2)2 sets of multi channel input 4 Lines REC Output (Both L and R channels) 0/-3/-6/-9/-12d B Outline 80P6N-A 0.8mm Pitch QFP (20.0mm x 14.0mm x 2.8mm) OUTLINE REC Output Input attenuator Output Gain Control 0/+3/+6/+9/+12d B Balance Out Loudness - 1 Built-in Balance out (for ADC) Built-in Loudness circuit of center tap type in FL/FRch - 1 Balance output and loudness function can’t be used at the same time. REMENDED OPERATING CONDITION Supply Voltage Range AVCC=7.0V(typ) , AVEE=-7.0V(typ) , DVDD=5.0V(typ) SYSTEM BLOCK DIAGRAM CLOCK REC OUTL TONE Zero-Cross LATCH DATA Output Gain Control Loudness Tap Input attenuator DVDD AVCC AVEE DGND Loudness Tap u- Interface Zero-Cross Output Gain Control TONE 1 2 3 4 5 6 7 8 9 10 Flout TONE Zero-Cross Lch FRout FLch VOL To loudness tap Zero-Cross TONE Loudness /Balance-Output L Zero-Cross Cout SLout Rch 1 2 3 4 5 6 7 8 9 10 Input attenuator Balance+Output L FRch VOL To loudness tap Zero-Cross INGND Loudness /Balance-Output R Balance+Output R Zero-Cross Zero-Cross SBLout SBRout SRout Zero-Cross REC...