M65676FP Datasheet | Mitsubishi Electric

MITSUBISHI ICs (TV) PRELIMINARY Notice:This is not a final specification. Some parametric limits are subject to change. M65675FP/M65676FP DIGITAL NTSC/PAL ENCODER DESCRIPTION The M65675FP/M65676FP is a NTSC/PAL encoder LSI that converts CCIR 601 or CCIR 656 (SMPTE125M) format digital video signals into analog ponent and posite video signals in accordance with either NTSC or B/G-PAL standards. The 10-bit digital luma (Y) and analog chroma (U/V) signals are available in Y/U/V output mode. In addition it performs the closed caption capability (TV line 21/ NTSC), CGMS- 1 encoding (TV line 20/NTSC), WSS- 2 encoding (TV line 23/PAL), Macrovision copy protection - 3 function (Rev. 7.01) and on-screen display. The OSD function can be directly accessed by the OSD microprocessor via built-in interface. - - - - - Controllable Picture Processing Functions Color, TINT and Brightness Built-in Analog Functions Y/C Mixing Two 10-bit DACs Three 6-d B Amplifiers Built-in 27 MHz System Clock Generator Single 3.3V Supply 64-pin PQFP Package Note - 1: Copy Generation Management System-A (IEC1880) - 2: Wide Screen Signaling (ETS300 294) - 3: This applies to M65675FP only. This device is protected by U.S. patent number 4631603, 4577216 and 4819098 and other intellectual property rights. The use of Macrovision's copy protection technology in the device must be authorized by Macrovision and is intend for home and other limited pay-par-view use only, unless otherwise authorized in writing by Macrovision. Reverse engineering or disassembly is prohibited. - 4: Y output is 10bit digital signal. Features - - - - - - - - - - - NTSC and B/G-PAL Outputs ponent Y/C (S-Video), posite (CVBS) or Y - 4/U/V Outputs Supporting CCIR601, CCIR656 (SMPTE125M) Format Data Processing Y/Cb/Cr and Y/U/V Pixel Data 27MHz Clock Frequency (Two-times Oversampling) Macrovision Copy Protection- 3 Processing (Revision 7.01) Close Captioning Supporting (line 21/NTSC) (ODD Parity Operation) V-Code Supporting...