Datasheet4U Logo Datasheet4U.com

MM1426 Datasheet Driver Ic

Manufacturer: Mitsumi Electronics

Overview: MITSUMI Driver IC for Vibrators MM1426 Driver IC for Vibrators Monolithic IC MM1426 Outline This IC was developed as a driver for vibrator motors, and has an output voltage set at 1.3V. The input voltage is monitored, and if a constant voltage is not input the output is turned off.

General Description

Pin No.

Pin name 1 CONT Functions Output voltage on/off-control pin VCONT L H Output OFF ON Equivalent circuit diagram Connect cont-terminal with VIN, when it is not used.

2 3 4 5 GND N.C VOUT VIN Regulator Output pin Voltage-supply input pin Output voltage is not output when input voltage is less than input voltage detection value.

Key Features

  • 1. Compact package for small mounting area. 2. In addition to output control through the input voltage, the IC can be turned on and off through the CONT pin. 3. Good ripple rejection. 4. Output currents of up to 150mA. 5. Operating voltage of up to 12V. 6. Output voltage is available in 0.1V steps from 1.2V to 2.0V. Package SOT-25A.

More Datasheets from Mitsumi Electronics

Part Number Description
MM1422 (MM14xx) Canal+Compatible I2C Bus Controlled 4-input 3-output AV Switch
MM1423 (MM14xx) Canal+Compatible I2C Bus Controlled 4-input 3-output AV Switch
MM1424 (MM1424 / MM1624) IC for XO
MM1442 (MM14xx) Canal+Compatible I2C Bus Controlled 4-input 3-output AV Switch
MM1443 (MM14xx) Canal+Compatible I2C Bus Controlled 4-input 3-output AV Switch
MM1451 Protection of Lithium-Ion Batteries
MM1478 RegulatorReset IC
MM1482 IC for Regulator+Reset
MM1034 HBS-Compatible Driver and Receiver with Power Supply
MM1035 System Reset

MM1426 Distributor