MC10E143
MC10E143 is 9-BIT HOLD REGISTER manufactured by Motorola Semiconductor.
- Part of the MC100E143 comparator family.
- Part of the MC100E143 comparator family.
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
9ĆBit Hold Register
The MC10E/100E143 is a 9-bit holding register, designed with byte-parity applications in mind. The E143 holds current data or loads new data, with the nine inputs D0
- D8 accepting parallel input data.
- 700MHz Min. Operating Frequency
- 9-Bit for Byte-Parity Applications
- Asynchronous Master Reset
- Dual Clocks
- Extended 100E VEE Range of
- 4.2V to
- 5.46V
- 75kΩ Input Pulldown Resistors
The SEL (Select) input pin is used to switch between the two modes of operation
- HOLD and LOAD. Input data is accepted by the registers a set-up time before the positive going edge of CLK1 or CLK2. A HIGH on the Master Reset pin (MR)...
