MC10E141 - 8-BIT SHIFT REGISTER

onsemi

General Description

The MC10E/100E141 is an 8-bit full-function shift register.

E141 performs serial/parallel in and serial/parallel out, shifting in either direction.

D7 accept parallel input data, while DL/DR accept serial input data for left/right shifting.

Key Features

700 MHz Min. Shift Frequency.
8-Bit.
Full-Function, Bi-Directional.
Asynchronous Master Reset.
Pin-Compatible with E241.
PECL Mode Operating Ran.

📥 Download Datasheet

MC10E141 8-bit shift register by onsemi - Datasheet Preview

Datasheet Details

Part number	MC10E141
Manufacturer	onsemi
File Size	143.76 KB
Description	8-BIT SHIFT REGISTER
Datasheet	MC10E141 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
MC10E141	8-BIT SHIFT REGISTER	Motorola
MC10E142	9-BIT SHIFT REGISTER	Motorola
MC10E143	9-BIT HOLD REGISTER	Motorola
MC10E101	Quad 4-Input OR/NOR Gate	Motorola
MC10E104	QUINT 2-INPUT AND/NAND GATE	Motorola

Other Datasheets by onsemi

Part Number	Description
MC10E142	9-BIT SHIFT REGISTER
MC10E143	9-BIT HOLD REGISTER
MC10E101	QUAD 4-INPUT OR/NOR GATE
MC10E104	QUINT 2-INPUT AND/NAND GATE
MC10E107	QUINT 2-INPUT XOR/XNOR GATE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

MC10E141 5 V ECL 8‐Bit Shift Register Description The MC10E/100E141 is an 8-bit full-function shift register. The E141 performs serial/parallel in and serial/parallel out, shifting in either direction. The eight inputs D0 − D7 accept parallel input data, while DL/DR accept serial input data for left/right shifting. The Qn outputs do not need to be terminated for the shift operation to function. To minimize noise and power, any Q output not used should be left unterminated. The select pins, SEL0 and SEL1, select one of four modes of operation: Load, Hold, Shift Left, Shift Right, according to the Function Table. Input data is accepted a set-up time before the positive clock edge. A HIGH on the Master Reset (MR) pin asynchronously resets all the registers to zero.