Datasheet4U Logo Datasheet4U.com

MC10EL15 Datasheet 1:4 Clock Distribution Chip

Manufacturer: Motorola Semiconductor (now NXP Semiconductors)

Overview: MOTOROLA SEMICONDUCTOR TECHNICAL DATA 1:4 Clock Distribution Chip The MC10EL/100EL15 is a low skew 1:4 clock distribution chip designed explicitly for low skew clock distribution applications. The device can be driven by either a differential or single-ended ECL or, if positive power supplies are used, PECL input signal. If a single-ended input is to be used the VBB output should be connected to the CLK input and bypassed to ground via a 0.01µF capacitor. The VBB output is designed to act as the switching reference for the input of the EL15 under single-ended input conditions, as a result this pin can only source/sink up to 0.5mA of current.

This datasheet includes multiple variants, all published together in a single manufacturer document.

Key Features

  • a multiplexed clock input to allow for the distribution of a lower speed scan or test clock along with the high speed system clock. When LOW (or left open and pulled LOW by the input pulldown resistor) the SEL pin will select the differential clock input. The common enable (EN) is synchronous so that the outputs will only be ena.

Similar Datasheet

Brand Logo Part Number Description Manufacturer
ON Semiconductor Logo MC10EL15 5V ECL 1:4 Clock Distribution Chip ON Semiconductor

More Datasheets from Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC10EL11 1:2 Differential Fanout Buffer
MC10EL12 Low Impedance Drive
MC10EL16 Differential Receiver
MC10EL01 4-input OR/NOR
MC10EL04 2-input AND/NAND
MC10EL05 2-input differential AND/NAND
MC10EL07 2-input XOR/XNOR
MC10EL31 D Flip-Flop
MC10EL32 2 Divider
MC10EL33 4 Divider

MC10EL15 Distributor