Datasheet4U Logo Datasheet4U.com

MC145170-2 - PLL Frequency Synthesizer with Serial Interface

General Description

section.

2.

ESD data available upon request.

Key Features

  • fully programmable R and N counters, an amplifier at the fin pin, on-chip support of an external crystal, a programmable reference output, and both single- and double-ended phase detectors with linear transfer functions (no dead zones). A configuration (C) register allows the part to be configured to meet various.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC14517B Dual 64-Bit Static Shift Register ON Semiconductor
MC14511 BCD-TO-SEVEN SEGMENT LATCH/DECODER/DRIVER UTC
MC14511B BCD-To-Seven Segment Latch/Decoder/Driver ON Semiconductor
MC14512B 8-Channel Data Selector ON Semiconductor
MC14513B BCD-To-Seven Segment Latch/Decoder/Driver ON Semiconductor

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC145170-1 PLL FREQUENCY SYNTHESIZER WITH SERIAL INTERFACE
MC145170 PLL Frequency Synthesizer with Serial Interface
MC145173 Dual-Band PLL Frequency Synthesizer with ADC and Frequency Counter
MC14517B Dual 64-Bit Static Shift Register
MC145100 4 X 4 CROSSPOINT SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Freescale Semiconductor Technical Data MC145170-2/D Rev. 5, 1/2005 MC145170-2 MC145170-2 PLL Frequency Synthesizer with Serial Interface Package Information P Suffix SOG Package Case 648 1 Introduction The new MC145170-2 is pin-for-pin compatible with the MC145170-1. A comparison of the two parts is shown in Table 1 on page 2. The MC145170-2 is recommended for new designs and has a more robust power-on reset (POR) circuit that is more responsive to momentary power supply interruptions. The two devices are actually the same chip with mask options for the POR circuit. The more robust POR circuit draws approximately 20 µA additional supply current. Note that the maximum specification of 100 µA quiescent supply current has not changed.