Datasheet4U Logo Datasheet4U.com

MC34055 - IEEE 802.3 10BASE-T TRANSCEIVER

Key Features

  • of the MC34055 include: Collision and Jabber detection status outputs, select mode pins for forcing Loop Back and Full.
  • Duplex operation, a Signal Quality Error pin for testing the collision detect circuitry without affecting the TP output, and a LED driver for Link Integrity status. An on.
  • chip oscillator, capable of receiving a clock input or operating under crystal control, is also provided for internal timing and driving a buffered clock output. The MC34055 is manufactured on a.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC340 Magnetic Contact Alarmtech
MC34001 GENERAL PURPOSE SINGLE JEFT OPERATIONAL AMPLIFIERS ST Microelectronics
MC34001 JFET INPUT OPERATIONAL AMPLIFIERS ON Semiconductor
MC34001A GENERAL PURPOSE SINGLE JEFT OPERATIONAL AMPLIFIERS ST Microelectronics
MC34001B GENERAL PURPOSE SINGLE JEFT OPERATIONAL AMPLIFIERS ST Microelectronics

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC3405 DUAL OPERATIONAL AMPLIFIER / DUAL VOLTAGE COMPARATOR
MC34050 (MC34050 / MC34051) Dual ELA-422/423 Transceivers
MC34051 (MC34050 / MC34051) Dual ELA-422/423 Transceivers
MC34001 JFET INPUT OPERATIONAL AMPLIFIERS
MC34002 JFET INPUT OPERATIONAL AMPLIFIERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Order this document by MC34055/D IEEE 802.3 10BASE-T Transceiver The Motorola 10BASE–T transceiver, designed to comply with the ISO 8802–3 [IEEE 802.3] 10BASE–T specification, will support a Medium Dependent Interface (MDI) in an embedded Media Attachment Unit (MAU)*. The interface supporting the Data Terminal Equipment (DTE) is TTL, CMOS, and raised ECL compatible, and the interface to the Twisted Pair (TP) media is supported through standard 10BASE–T filters and transformers. Differential data intended for the TP media is provided a 50 ns pre–emphasis and data at the TP receiver is screened by Smart Squelch circuitry for specific threshold, pulse width, and sequence requirements. www.DataSheet4U.