Datasheet4U Logo Datasheet4U.com

MC74HC540A - Octal 3-State Inverting Buffer/Line Driver/Line Receiver

General Description

INPUTS A1, A2, A3, A4, A5, A6, A7, A8 (PINS 2, 3, 4, 5, 6, 7, 8, 9)

Data input pins.

Data on these pins appear in inverted form on the corresponding Y outputs, when the outputs are enabled.

Output enables (active

low).

Key Features

  • inputs and outputs on opposite sides of the package and two ANDed active.
  • low output enables. The HC540A is similar in function to the HC541A, which has non.
  • inverting outputs.
  • Output Drive Capability: 15 LSTTL Loads.
  • Outputs Directly Interface to CMOS, NMOS and TTL.
  • Operating Voltage Range: 2 to 6V.
  • Low Input Current: 1µA.
  • High Noise Immunity Characteristic of CMOS Devices.
  • In Compliance With the JEDEC Standard No. 7A Requirem.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC74HC540A Octal 3-State Inverting Buffer/Line Driver/Line Receiver ON Semiconductor
MC74HC541A Octal 3-State Non-Inverting Buffer/Line Driver/Line Receiver ON Semiconductor
MC74HC573A Octal 3-State Noninverting Transparent Latch ON Semiconductor
MC74HC574A Octal 3-State Noninverting D Flip-Flop ON Semiconductor
MC74HC589A 8-Bit Serial or Parallel-Input/Serial-Output Shift Register ON Semiconductor

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC74HC541A Octal 3-State Non-Inverting Buffer/Line Driver/Line Receiver
MC74HC51 2-Wide / 2-Input/2-Wide / 3-Input AND-NOR Gates
MC74HC533A Octal 3-State Inverting Transparent Latch
MC74HC534A OCTAL 3-STATE INVERTING D FLIP-FLOP
MC74HC563 Octal 3-State Inverting Transparent Latch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Octal 3-State Inverting Buffer/ Line Driver/Line Receiver High–Performance Silicon–Gate CMOS The MC74HC540A is identical in pinout to the LS540. The device inputs are compatible with Standard CMOS outputs. External pullup resistors make them compatible with LSTTL outputs. The HC540A is an octal inverting buffer/line driver/line receiver designed to be used with 3–state memory address drivers, clock drivers, and other bus–oriented systems. This device features inputs and outputs on opposite sides of the package and two ANDed active–low output enables. The HC540A is similar in function to the HC541A, which has non–inverting outputs.