DESCRIPTION
The MPC9448 is specifically designed to distribute LVCMOS compatible clock signals up to a frequency of 350 MHz. The outputs buffers support driving of 50Ω terminated transmission lines on the incident edge: each output is capable of driving either one parallel terminated or two series terminated transmission lines. Two selectable, independent clock inputs are available, providing support of LVCMOS and differential LVPECL clock distribution systems. The MPC9448 CLK_STOP control is synchronous to the falling edge of the input clock. It allows the start and stop of the output clock signal only in a logic low state, thus eliminating potential output runt pulses. Applying the OE control will force the outputs into high--impedance mode. All inputs have an internal pull--up or pull--down resistor preventing unused and open inputs from floating. The device supports a 2.5V or 3.3V power supply and an ambient temperature range of --40°C to +85°C. The MPC9448 is pin and function compatible but performance--enhanced to the MPC948. © Motorola, Inc.
Motorola
